Bluetooth® Dial-Up Networking* with VZAccess Manager

1. Your device must be in Discoverable mode. If your device is not in Discoverable mode, refer to the instructions in the Make Your Device Discoverable section to complete this action.
2. Check the box for My device is set up and ready to be found and press Next to continue.
   
   
3. The Bluetooth Device Wizard will now try to discover your device. Once your device is found, select it and press Next to continue.
   
   
   
   
   
4. You will need to create a passkey for the device. Select Let me choose my own passkey and enter an 8 to 16-digit passkey of your choice. Press Next to continue.
   
   
5. Your laptop will now try to connect to your device.
   
   
   
   
   • You should get a pairing request for your device. Select Yes to accept, enter the passkey code to authenticate the connection, then press OK to continue. If the passkey was accepted, you will see the Paired Successfully message displayed.
   • Press OK to continue. The device is now enabled to connect to the laptop.
   • A pop-up confirmation that the pairing was successfully completed will display. 
     
     
6. From VZAccess Manager, select My device is paired and is ready to be detected, and then press Next to continue.
   
   
   
   
   VZAccess Manager will now detect your Bluetooth-enabled device.
   
   
7. Once VZAccess Manager is configured to use your modem, press Next to continue.
   
   
8. Enter your mobile device phone number and press Next to continue.
   
   
9. Select Finish to complete the VZAccess Manager process.
   
   

1. From the VZAccess Manager menu screen, press the Connect WWAN button.
   
   
2. Press Continue to establish a Mobile Broadband or NationalAccess connection.
   
   
   
   After pressing Continue, you will instantly be connected.
   
   

Prev | Next (Page 3 of 4)